null
Created with Sketch. Created with Sketch.

Windshields

  • 23 inch Dust/Wind Deflectors

    23 inch Dust/Wind Deflectors

    Polaris RZR 1000 (2014-2018), Polaris RZR 1000 Turbo (2016-18), Polaris RZR 900 (2015-2018)   Description Dust/Wind Deflectors (Pair)  Fit all years, and models of Polaris RZR Here at Double Ott UTVA, we have discovered a way to reduce...

    $60.00
    Add to Cart
  • 23 inch Tinted Dust/Wind Deflectors

    Polaris RS1 (2018), Polaris RZR 1000 (2014-2018), Polaris RZR 1000 Turbo (2016-18), Polaris RZR 900 (2015-2018)   Description Dust/Wind Deflectors (Pair)  Fits Polaris RZR 900 (15-18), RZR 1000 (14-18), RZR Turbo...

    $70.00
    Add to Cart
  • Made from Hard-Coated Polycarbonate (Hard-Coated on both sides).
Adjusts to four positions; open, closed and two vented postions.
Seals along the top.
Gas Struts hold it open.
Made In Cleveland, Ohio.
This Hard Coated Windshield adjusts to four positions; open, closed, and two vented positions. The gas struts hold it open for hunting and while driving less than 5 MPH such as around the campsite etc. The two vented positions allow for airflow on warm days while still providing protection from the wind, rain and snow. The fully closed position is great for cold days. This windshield runs all the way to the top just under your stock visor keeping out the cold air. This is great option when running with a canvas cab or in the winter if you have a heater.

Polycarbonate will not easily crack like cheaper materials such as Acrylic. It is virtually unbreakable under normal conditions. The hard coating is applied to both sides so that it will not easily scratch on the trail or when cleaning. With just a little bit of care this may be the last windshield you have to buy for your buggy.

All the mounting hardware is made from Billet aluminum and steel, making it very durable. Flip Up windshield Hard-Coated Polycarbonate

    Flip Up windshield Hard-Coated Polycarbonate

    Made from Hard-Coated Polycarbonate (Hard-Coated on both sides). Adjusts to four positions; open, closed and two vented postions. Seals along the top. Gas Struts hold it open. Made In Cleveland, Ohio.   This Hard Coated Windshield adjusts to four...

    $365.99
    Choose Options
  • Full Windshield (1000/900)

    Description Full Windshield, Clear Fits POLARIS RZR 900 ’15-’16 and RZR 1000 ’14-’16  – except turbo Our windshields are manufactured to our highest standards with quality features and made from scratch resistant,...

    $169.95
    Add to Cart
  • Made from 1/4" Thick MR-10 Hard Coated Lexan (Polycarbonate).
Attaches with our patent pending rubber "Fast Straps".
Rubber mounting straps will not rust or rattle.
Bottom seal protects your hood.
DOT-rated and stamped.
Made from 1/4" thick hard coated MR-10, this is probably the last windshield you will ever buy for your RZR XP1000. It features our "Fast Straps" so you can easily remove the windshield without any tools. Simply unhook the rubber straps. Rubber straps will not scratch your cage. DOT rated and stamped. Hard Coat Full Windshield

    Hard Coat Full Windshield

    Made from 1/4" Thick MR-10 Hard Coated Lexan (Polycarbonate). Attaches with our patent pending rubber "Fast Straps". Rubber mounting straps will not rust or rattle. Bottom seal protects your hood. DOT-rated and stamped.   Made from 1/4" thick hard...

    $209.99
    Choose Options
  • CNC Routered from Hard Coat Polycarbonate (both sides).
3/16" Thick.
Mounts behind the cage so harness can be used.
Still allows access to engine trap door.
EMP Etched Logo.
Mounts with rubber Fast Straps so you can remove it in seconds.
Virtually unbreakable, unlike cheaper acrylic cab backs on the market.
Made In Cleveland, Ohio.
NOTE: There are tabbed knock outs for rear bars. If you are using optional factory rear bars you can easily cut out the holes for them by simply cutting the three tabs with a jig saw or hack saw.

We ship it with the manufacturers protective film on both sides so you can read for yourself that it is made from hard coated material. If the film is removed item can not be returned for any reason.

We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. Hard Coated Cab Back / Dust Stopper

    Hard Coated Cab Back / Dust Stopper

    CNC Routered from Hard Coat Polycarbonate (both sides). 3/16" Thick. Mounts behind the cage so harness can be used. Still allows access to engine trap door. EMP Etched Logo. Mounts with rubber Fast Straps so you can remove it in seconds. Virtually...

    $195.00
    Choose Options
  • Polaris RZR PRO XP Half Windshield

    Polaris RZR PRO XP Half Windshield

    FITMENT Polaris RZR PRO XP : 2020+ FEATURES Available Styles Clear standard Polycarbonate Dark tint standard Polycarbonate Made of 1/4” polycarbonate—250x stronger than glass Protects passenger from flying mud...

    $124.95
    Choose Options