CAN-AM

RGB LED Whip Lights

READ CAREFULLY BEFORE PURCHASING - NOT ALL SIZES FIT ALL MODELS  Formed Cage Vertical Polaris Ranger XP 570 : 2015-2016 Polaris Ranger XP 570 Crew : 2015-2016 Polaris Ranger XP 900 : 2013+ Polaris Ranger XP 900 Crew : 2014+ Polaris...

Can-Am Defender HD 8/HD 9/HD 10 Tinted Rear Cab Panel

Added Protection and comfortability. Protect the occupants of your Can-Am Defender from off-road hazards such as rocks, branches, and other debris with Rough Country's Scratch-Resistant Windshields. UTV Windshields offer a clear visual of the trail...

Can-Am Defender HD 8/HD 9/HD 10 Electric Tilt Windshield

Maximum Durability and Visibility. Say hello to a whole new view with Rough Country's Auto-Tilt Glass Windshield for the Can-Am Defender. With its DOT-approved glass and sturdy construction, this windshield is less likely to crack or break, even...

Can-Am Defender HD 5/HD 8/HD 9 Adjustable Suspension Lift Kit

Improved Stance, Balance, and Handling. If you want to improve your Can-Am Defender's on-road performance and off-road capabilities, Rough Country's M1 Coilovers are the way to go. Our M1 Coilovers help stabilize your vehicle's movements, enhancing...

Can-Am Defender HD 5/HD 8/HD 9 M1 Rear Coil Over Shocks

Improved Stance, Balance, and Handling. If you want to improve your Can-Am Defender's on-road performance and off-road capabilities, Rough Country's M1 Coilovers are the way to go. Our M1 Coilovers help stabilize your vehicle's movements, enhancing...

Can-Am Defender HD 5/HD 8/HD 9 M1 Front Coil Over Shocks

Improved Stance, Balance, and Handling. If you want to improve your Can-Am Defender's on-road performance and off-road capabilities, Rough Country's M1 Coilovers are the way to go. Our M1 Coilovers help stabilize your vehicle's movements, enhancing...

CAN-AM Defender HD 5/HD 8/HD 9/HD 10 High Clearance 2" FWD Offset Control Arms w/Ball Joints

Unlock the full potential of your UTV with Rough Country’s Forged Aluminum Control Arms for the Can Am Defender. Stock vehicles are limited to tire height increases due to front tire-to-body contact. Our Forward Offset Control Arms eliminate those...

CAN-AM Cab Enclosure

Made in the USA Marine grade polyester 1.9oz Canvas  30 gauge clear window material YKK #10 Zippers Large Snaps (stainless steel) Instructions included  Over 200 hours of development to insure fit and finish Field tested for over...

CAN AM X3 GATED SHIFTER

A true in-line shifter with Park Lockout. Available for the following models: all Can Am X3 64” & 72”-- Quick Shot Gated Shifters feature an in handle trigger mechanism for easier access. with its compact size, spring-loaded gate...

CAN-AM MAVERICK R LOWER FRONT A-ARM WELD IN GUSSET KIT

CAN-AM MAVERICK R LOWER FRONT A-ARM WELD IN GUSSET KIT BY S3 POWERSPORTS

Can-Am Maverick R Pull Plate (Radius Rod Plate)

Strengthen your rear chassis and add a tow point with the S3 Power Sports Can-Am Maverick R Rear Pull Plate. The thick plate construction is engineered to reduce stress and improve the strength of the rear chassis. The design of the S3 Power Sports...

Can-Am Maverick R Radius Rod Nut Retainers

Replace the factory radius rod mounting hardware with our S3 Power Sports Radius Nut Retainers! With this kit you will eliminate the concern of stock hardware breaking loose and spinning when removing or servicing your radius rods. The integrated nut...

Can-Am Maverick R - Trailing Arm Weld-In Gusset Kit

Increase the longevity of your Can-Am Maverick R Trailing Arms with the S3 Power Sports Weld-In Gusset Kit! Engineered to increase the rigidity of the OEM trailing arms and strengthen critical points; also improves impact and wear resistance. Our...

Can-Am Maverick R – CV Guard

Protect one of the most important parts of any rig, your CV’s, with our S3 Power Sports Maverick R CV Guard! Engineered and designed to cover your rear driver inner CV joint from rocks and debris that is always getting thrown back by the front...

Can-Am Maverick R Rear Sway Bar Links

Improve the strength and reliability of your Can-Am Maverick R with S3 Power Sports Rear Sway Bar Links made out of 7075 Aluminum! Lightweight and durable, these heavy-duty sway bar links are designed to outperform OEM with increased suspension strength...

Can-Am Maverick R Lower A-Arm Weld-In Gusset Kit

Increase the longevity of your Can-Am Maverick R Lower A-Arms with the S3 Power Sports Weld-In Gusset Kit! Engineered to increase the rigidity of the OEM Lower A-Arms and strengthen critical points; also improves impact and wear resistance. Our...

Can-Am Maverick R Power Pack Weld-In Skid Plate

Protect your Can-Am Maverick R’s engine and transmission with the S3 Power Sports Power Pack Weld-In Skid Plate. Constructed from 3/16” steel plate and thick-walled support tubes, this kit is designed to give you peace of mind that you are...

Can-Am Maverick R Radius Rod Pull Plate

Strengthen your rear chassis and add a tow point with the S3 Power Sports Can-Am Maverick R Rear Pull Plate. The thick plate construction is engineered to reduce stress and improve the strength of the rear chassis. The design of the S3 Power Sports...

Can Am Maverick X3 RC Complete Spring kit

FREE SHIPPING PRODUCT DESCRIPTION Experience the pinnacle of off-road performance with our Spring Kits specifically designed for your machine . Engineered to perfection, these kits will transform your ride into a dynamic and exhilarating adventure,...

O2 - Cap - M18

18mm x 1.50 - O2 Bung

The O2 Weld-In Bungs from HMF work specifically for our high-end exhaust systems These bungs are made from Stainless Steel and fit standard bosch O2 sensors.  Fitting Bung, Weld-In Oxygen Sensor Stainless Steel 18mm

18mm - 12mm O2 Bung Adapter

Made from high-quality stainless steel, this bung adapter screws into an 18mm bung for use with some 12mm narrow-band O2 sensors.  Outside thread is M18x1.5 and the inside thread is M12x1.25. Go from 18mm to 12mm bung size Outside Thread: M18...

12mm x 1.25 O2 Bung Cap

The 12mm O2 Cap from HMF works when using an O2 simulator and the O2 port on the pipe needs closed.  The  12mm O2 Cap is plated and has a 12mm x 1.25 Thread size. Oxygen Sensor Cap Plated 6mm Allen 12mm x 1.25 Thread...

12mm x 1.25 O2 Bung

The O2 Weld-In Bungs from HMF works with high-end after-market exhaust systems. These bungs are made from Stainless Steel and fit standard bosch O2 sensors.  Fitting Bung, Weld-In Oxygen Sensor Stainless-Steel 12mm

All Terrain Drive Belt - Can-Am Maverick/Max

All Terrain DRIVE BELT - CAN AM MAVERICK UPGRADED The most rugged, strongest, and longest lasting belt available for your high-performance side by side!  All terrain belt designed for any riding condition. Sand, dirt, mud, trails and...

All Terrain Drive Belt - Can-Am X3

All Terrain DRIVE BELT - CAN AM X-3 UPGRADED The most rugged, strongest, and longest lasting belt available for your high-performance side by side!  All terrain belt designed for any riding condition. Sand, dirt, mud, trails and...

RACE SERIES BELT - Can-Am X3

RACE SERIES BELT   Built to decrease the chances of snapping or delamination in race applications when the tendency is to land on the throttle. Manufacturing, quality control certifications — ISO-14001, ISO-9001, and IATF-16949. Newly...

Sandstorm Drive Belt - Can-Am Maverick/Max

SAND STORM DRIVE BELT - CAN AM MAVERICK UPGRADED The most rugged, strongest, and longest lasting belt available for your high-performance side by side!  All terrain belt designed for any riding condition. Sand, dirt, mud, trails and...

Sandstorm Drive Belt - Can-Am X3

SAND STORM DRIVE BELT - CAN AM X-3 UPGRADED The most rugged, strongest, and longest lasting belt available for your high-performance side by side!  All terrain belt designed for any riding condition. Sand, dirt, mud, trails and more! Superior...

Worlds Best Belt - Can-Am X3

Manufacturing, quality control certifications — ISO-14001, ISO-9001, and IATF-16949. 3rd Generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market, surpassing...

Can-Am® Maverick X3 Slip-On Exhaust

The HMF™ Slip-On (Muffler Delete) exhaust system for the Can-Am® Maverick X3 is a no core slip-on system that sounds loud and angry.  It utilizes the stock end cap, turbo and the downpipe heatshield.  Cerakoted™ Black, the...

Can-Am® Maverick X3 Big Core (Turbo Back) Titan Series Exhaust System

The single 5” Stainless Steel silencer and unrestricted 2.5” downpipe was designed and built for serious racing and enthusiasts alike.  The silencer uses a 2.5” core to match the downpipe and minimizes back pressure on the turbo...

Can-Am® Maverick X3 Dual Full (Turbo Back) Titan Series Exhaust System

The single 5” Stainless Steel silencer and unrestricted 2.5” downpipe was designed and built for serious racing and enthusiasts alike.  The silencer uses a 2.5” core to match the downpipe and minimizes back pressure on the turbo...

Can-Am® Maverick X3 Big Core (Turbo Back) Exhaust System

The Can-Am® Maverick X3 exhaust systems are available in various different systems. Dual Full Turbo-Back System in the Performance and Titan Series, a Single Full Turbo-Back Big Core in the Performance and Titan-SS Series, and a Slip-On style Muffler...

Can-Am® Maverick X3 Dual Full (Turbo Back) Exhaust System

The Can-Am® Maverick X3 exhaust systems are available in various different systems. Dual Full Turbo-Back System in the Performance and Titan Series, a Single Full Turbo-Back Big Core in the Performance and Titan-SS Series, and a Slip-On style Muffler...

Can-Am Maverick X3 High Flow Head Pipe

Replacement header pipe for Can-Am Maverick X3 Allows for the removal of the catalytic converter, while retaining the stock muffler for testing purposes Direct bolt on system 304 Stainless Steel Fully Tig Welded Oxygen sensor bung Significant...

Can-Am Maverick X3 SIDE PIECE Header Pipe with Electronic Cutout

Looking for some extra power and sound, but you're not trying to party all of the time? The Trinity Racing Side Piece is the best of both worlds! The electronic cutout allows you to change the sound of your exhaust with the flick of a switch! Want to...

Can-Am Maverick X3 CENTER EXIT SLIP ON EXHAUST

304 brushed stainless steel exhaust 14" Single stainless steel muffler in a brushed finish Fully Tig Welded Mounts to stock or aftermarket header Utilizes Stock or Trinity Racing billet tip! Significant horsepower and torque gains Light...

Can-Am Maverick Sport Rear Bumper

The HMF Rear Bumper for the Can-Am® Maverick Sport is constructed from .095” wall steel tubing and powder coated for the ultimate protection on the rear of the Can-Am® Maverick Sport. The rear bumper easily mounts to the frame...

Can-Am Maverick Sport HD Front Bumper

The HMF HD Front Bumper for the Can-Am® Maverick Sport is built from .095" steel tubing and offers an increased form of protection. The bumper itself adds an incredible look to the front of the machine.    Features: Built...