ALL

3/16″ thick Fits 2 or 4 seater Can Am X3 CNC Laser Cut Made in USA Sold as 2 pcs only for 2 or 4 seat “B” pillar 200291 We CNC Laser cut our Can Am X3 Roll Cage Mounts from 3/16 P&O steel. ...

Complete builder kit for the X3 Fits 2 or 4 seater Can Am X3 CNC machined cage bungs CNC Laser Cut plates Made in USA Sold as a set for one machine   200222 / 200224 / 200290 / 200291 / 200294 AJK Offroad...

3/16″ thick Fits 4 seater Can Am X3 CNC Laser Cut Made in USA Sold as 2 pcs only for 4 seat “C” pillar 200294 We CNC Laser cut our Can Am X3 Roll Cage Mounts from 3/16 P&O steel.  These are perfect for...

3/16″ Thick CNC Laser cut and bent Perfect for bumpers MADE IN USA We have made a Radius Rod Plate for the Can Am X3.  This plate works great for added strength and also for people that want to tie there rear bumpers into...

American Made Perfect for doors on your SXS Works good for tire carriers Uses 1/2″ shoulder bolt Rotates 180 degrees Nice weld chamfer Rugged design Fits 1.75″ dia tubing with a .120″ wall Click for Dimensions 200315   Our Tubing Hinges are a great...

Weld on Perfect for your DIY bumpers 1″ hole 7/8 Thick Works great with a 3/4 D-Ring/Shackle Sold Individually Click for Dimensions. SKU #200146 These Weld on D-Ring Shackle Clevis Tab Mounts are a must for the DIY.   Many people use these Weld...

Great for link bars and roll cages Perfect way to run your hydraulic and brake lines down your four-link bars No more zip ties Made from 6061 aluminum This part is part of an assembly where you need to also buy the base clamp...

Looks Great Fit Polaris Ranger 1500 XD Color Match Hex Accents Sold as a set one for each side Easy to install Made in USA SKU 200597/200598 Add some color to your Polaris Ranger 1500XD with our Accent Covers.  These covers give your Polaris...

Flexibility to easily remove the tubing to access motor, spare tire, ect. Great for SXS bumpers and roll cages Bolts together with 3/8-16 SHCS Bolts start from same side for ease of installation These are short in length Sizeable weld chamfers SKU 200171 /...

Made from 1018 Mild Steel CNC Machined NOT LASER CUT Completes tubing ends, able to be welded Great for bumpers, cages, and any custom tubing projects Designed a little smaller than tubing for a nice weld Adding tubing end caps will make any off...

Sold Individually Fits all Polaris Rangers 1500 XD Made from 6061-T6 Billet Aluminum All Hardware included Made in USA SKU # 200583 Our Polaris Ranger 1500 XD Bed Rail Tie Down Hooks tighten to your bed rails using our special nut.  These work perfect...

2024 RZR XP 1000 “A” Pillar Mount 10 gauge steel Sold as 4 pcs Made in USA SKU 200574 Our 2024 Polaris RZR XP 1000 A Pillar Mount is just what you need for your next cage build.  These are designed at the same...

Great for link bars and roll cages Perfect way to run your hydraulic and brake lines down your four-link bars No more zip ties Made from 6061 aluminum We have combined our popular hydraulic / brake line clamp along with our base clamps.  This...

Weld on Perfect for your DIY bumpers 1″ hole 7/8 Thick Works great with a 3/4 D-Ring/Shackle Sold Individually Fits around 1 3/4 tubing Click for Dimensions. SKU #200145 These Weld on D-Ring Shackle Clevis Tab Mounts are a must for the DIY.  ...

Great for link bars and steering bars Easy to adjust and tighten your jam nut with the hex American made 1018 steel Inside threads are threaded completely through Tube Diameter Outside: 1.50" hex Inside 1.00" hex CNC-machined in the USA The AJK Off Road...

Made from 1018 Mild Steel Easily aligns with tubing and has a nice weld chamfer Completes tubing ends, able to be welded Great for bumpers, cages, and any custom tubing projects Rounded Steel Tubing End Caps CNC-machined in the USA Adding tubing end caps...

Perfect fit in your Polaris PRO R Long version 1.70" LONG Weld on Factory style bung Bolt and washer included 1.75 OD .120 or .095 wall thickness Made in USA Our Polaris Pro R Cage bung sets are perfect to fabricate a custom roll...

.120″ Thick .25″ Hole CNC Laser cut Made in USA Sold Individually Click for Dimensions 200570 Our CNC Laser cut Small Body Panel Radius Tabs work great for attaching panels on your SXS, Truck, UTV, Jeep, or any offroad vehicle. We CNC laser cut...

We’ve combined everything you need into one complete Can-Am X3 Dual Battery Kit. This kit includes our heavy-duty battery box, a 270 CCA AGM maintenance-free battery, a True Am battery isolator, and all the necessary hardware for a smooth installation. Designed to fit neatly...

Great for roll cages American Made 1.75″ OD tubing size Nice weld chamfer Sold as a set (1) right and (1) left These are great for the DIY roll cage builders.  We have taken the stock Can-Am X3 cage bungs and reproduced them using...