MAINTENANCE

Great for roll cages American Made 1.75″ OD tubing size Nice weld chamfer Sold as a set (1) right and (1) left These are great for the DIY roll cage builders.  We have taken the stock Can-Am X3 cage bungs and reproduced them using...

Uses MALE DIAMOND KNURLS Made from 6061-T6 Billet Aluminum Uses ½” hardened Zinc plated stud with wing nut Clamps around tubing using two ¼-20 SHCS SOLD INDIVIDUALLY Every Hi-Lift Mount/Clamp uses MALE DIAMOND KNURLS for a secure hold on the tube you are clamping....

3-place MALE DIAMOND KNURL Only one on the market with knurls on the inside for extra holding force Works great for steering bars. Great for removable brackets, motor braces, or any other item on your off road rig. Wall thickness of ⅜” Includes six,...

No more zip ties Made from 6061 aluminum A must for mounting many different items to your tubing We leave it up to you to modify this clamp however you want to hold whatever you want Clamp should be ordered with part #200130, #200131,...

Made from 2.25″ DOM tubing .125” wall 2.00” inside diameter Includes two ⅜” bolts and two nylon locking nuts   CNC-machined in the USA for increased accuracy, not laser cut. Each Weld on Bump Stop can is precision CNC-machined, not laser cut, for increased...

1/4″ thick 1/2″ bolt CNC Laser Cut Made in USA Sold Individually Click for Dimensions 200263 These Flat Builder Tabs work great for mounting your shocks along with many other items.  These are CNC laser cut from 1/4"' thick HRS P&O steel.  These are...

1″ Ball Mount Made from 6061-T6 aluminum Great for Ram Mount Products Thumb screw included Click for Dimensions. SKU #200204 This 1" Billet aluminum extension works great to give your Ram mount that extra socket when needed.  This mount is CNC machined from 6061-T6...

Made from 2.25″ DOM tubing .125” wall 2.00” inside diameter Includes two ⅜” bolts and two nylon locking nuts SOLD IN PACKAGE OF 2 PCS   CNC-machined in the USA for increased accuracy, not laser cut. Each Weld on Bump Stop can is precision...

Weld on Perfect for your Kawasaki KRX cages .120″ and .090″ wall thickness Made in USA Sold Individually Click for Dimensions SKU #200240 Kawasaki KRX weld in roll cage bungs.  These are great for the DIY roll cage builder.  We have taken the stock...

Great for roll cages American Made 1.75″ or 2.00″ OD tubing size Nice weld chamfer Sold Individually   These are great for the DIY roll cage builder.  We have taken the stock Honda Talon bungs and reproduced them using 1018 steel.  We them CNC...

Flexibility to easily remove the tubing to access motor, spare tire, ect. Bolts together with two 3/8-16 SHCS Both bolts start from same side for ease of installation Sizeable weld chamfers Our off road tubing disconnects work great to protect your engine and other...

Made from 6061-T6 Billet Aluminum Easily “snaps” on your roll cage Perfect way to add a windshield to your powder coated roll cage Clean looking Can be used for roofs and skid plates also 1/4-20 threads Stainless steel phillips bolt supplied AJK Offroad designed...

Flexibility to easily remove the tubing to access motor, spare tire, etc. Great for SXS bumpers and roll cages Bolts together with two 3/8-16 SHCS Both bolts start from same side for ease of installation These are short in length Radius on the ends...

1/4″ thick CNC Laser Cut Made in USA Sold Individually Click for Dimensions 200269 These Angle Gussets work great for adding some strength where it is needed.  These are CNC laser cut from 1/4"' thick HRS P&O steel.

MADE IN USA Perfect for body panels CNC machined from 6061-T6 billet aluminum Sold in packages of 10 These Aluminum Body Washers are a great addition to make your body panels look great.  Our body washers give your panels a bit more texture and...

Weld on Perfect for your Kawasaki KRX cages .120″ and .090″ wall thickness Made in USA Sold Individually Click for Dimensions SKU #200283 Kawasaki KRX weld in roll cage bungs.  We have designed these as a simpler option to our already popular Kawasaki KRX...

3/16″ thick Fits 2 or 4 seater Can Am X3 CNC Laser Cut Made in USA Sold as 2 pcs for the “A” pillar 200290 We CNC Laser cut our Can Am X3 Roll Cage Mounts from 3/16 P&O steel.  These are perfect for...

3/16″ thick Fits 2 or 4 seater Can Am X3 CNC Laser Cut Made in USA Sold as 2 pcs only for 2 or 4 seat “B” pillar 200291 We CNC Laser cut our Can Am X3 Roll Cage Mounts from 3/16 P&O steel. ...

Complete builder kit for the X3 Fits 2 or 4 seater Can Am X3 CNC machined cage bungs CNC Laser Cut plates Made in USA Sold as a set for one machine   200222 / 200224 / 200290 / 200291 / 200294 AJK Offroad...

Every surface is CNC machined Wall thickness of 3/8″ 6) 1/4-28 SHCS supplied Made in USA Sold Individually AJK Offroad machines our tubing clamps / 6 bolt couplers in house.  Our tubing couplers use six 1/4-28 SHCS to hold the two halves together. These steel...