New Products

THIS LISTING IS FOR THE XP1000 2024 - 2026 model This listing is for the Direct Bolt Radius Rods. The lowers are High clearance.  Includes all spacers needed for install.  PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE...

THIS LISTING IS FOR THE XP1000 2024 - 2026 model This listing is for the 2 Heim Radius Rods. The lowers are High clearance.  Includes all spacers needed for install.  PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE...

This is a replacement for the steel or billet radius plates that are used in correspondence with a Turbo S L&W Bumper. They come in black only. PLEASE NOTE WITH USING THIS PLATE YOU MAY HAVE TO REMOVE AND OR MOTIFY THE PLACEMENT OF...

This set of A Arms has adjustable uppers. The adjustment is in the uppers only, the lowers are direct bolt. The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter. You can reuse your stock bushings and stock ball joints....

PRO XP/R GRILL FITMENT: All Pro XP models and Pro R/ Turbo R models 2020-2024 Easily snaps in and out. Not screwed to the machine. Must drill 4 holes to install snap tab. Side Vents DO NOT WORK WITH PRO XP MODELS  

Made from 3/16 STEELThe factory prop shaft crossmember is known to bend. When the crossmember bends, itchanges the prop shaft angle and can lead to premature bearing failure and vibrations. Our crossmembers are 2.5x thicker and add strength where it is needed.Works with factory...

These Can Am X3 Radius Rods are for the 72″ models ONLY- compatible with 17-current model Can-Ams. These radius rods come with 2 Heim Adjustable Uppers- We use left-hand and right-hand threads on our heim joints so that you can adjust your camber easily!The...

2024-2025 RZR XP1000 FORWARD A ARMS1.75” FORWARD OFFSET A ARMSMADE FROM 1.25” X .120 AND 1.25” .188 DOML and W offers a life time warranty on bending and breaking the A arms.Will NOT work with 6+1 or 5+2 Offset Wheels, UNLESS you are running...

KAWASAKI KRX SIDE VENT COVERSMade from 18ga steelUses factory hardware. No drilling requiredAdd some bling to your KRX while also protecting the frog skin

These mounting tabs can be used to mount a 30-34 inch light bar or single pods. They are powder coated black. They do not come with hardware. You will use the hardware from your cage to mount them. The tabs mount to the bottom...

THESE REAR A-ARMS FIT 18′ TO CURRENT MODEL RANGERS. This set of Rear A-Arms have adjustable uppers. The adjustment is in the uppers only, the lowers are direct bolt. The Upper Adjustable A-Arms have a 1 inch diameter Pin. This Listing Is For A...

This set of A Arms has adjustable uppers. The adjustment is in the uppers only, the lowers are direct bolt. The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter. You can reuse your stock bushings. THIS LISTING IS FOR...

KAWASAKI KRX 1000 SEATBELT HARNESS BAR ** THIS DOES NOT WORK WITH 4 SEATER KRX)**A must have on the KRX to be able to run aftermarket harnesses.Works on factory cage as well as our L&W cageBolts in using factory boltsDoes not work with click...

PRO R 2 SEAT CAGE 2022-2024 *2025-2026 models (cage will ONLY work on models without factory speakers) 2025 MODEL PRO R FACTORY SPEAKERS WILL NOT FIT WITH THIS CAGE, WE DO NOT OFFER A WINDSHIELD FOR THE 2025 MODEL AT THIS TIME.  ( however...

Race Style A-Arms (1.75 FORWARD w/adjustable uppers))- (Turbo S) This is for the MEGA BALL JOINT. BUILT TO ORDER These A Arms are 1 1/2 – .120 wall with extra bracing on the arms. You can reuse your stock A-Arm bushings- MUST USE MEGA...