Replace the tender springs on your Kawasaki KRX 1000 4 Seater while retaining the main springs and shock assemblies. This All Thingz UTV front-and-rear package is the listing marked All Models for the 4 Seater application. All Thingz UTV manufactures the RZR AID springs in this kit and sells them directly.
| Detail | Application |
|---|---|
| Vehicle | Kawasaki KRX 1000 4 Seater |
| Fitment notes | Match the KRX 1000 4 Seater application and identify the installed shocks with your order. All Models refers to this listed application, not every Kawasaki model or aftermarket shock. |
Before ordering: Confirm the model, seating and installed shocks. Double-check your selected spring color and package. Supply the model year, usual passenger/cargo load and suspension modifications with your order.
| Selected package | Contents |
|---|---|
| Tender spring kit | Two front and two rear tender springs |
Choose from the colors currently offered in the selector. Powder-coated finishes are applied at All Thingz UTV; use the displayed price for your selected finish and package.
Optional silencer rings: Select Yes to add ATU silencer rings, or No for the spring package without that add-on. Silencer rings are not crossover adjustment rings.
The tender spring works with the main spring in the shock assembly. While both are free to compress, their combined spring rate is lower than either spring alone. This lets the spring stack respond differently through its travel. A tender spring that remains fully compressed at normal loaded ride height has little compression travel left to contribute; however, spring contact by itself is not proof of a defect. Evaluate ride height, load and the intended shock setup together.
This tender upgrade retains the main springs. A full dual-rate replacement changes both upper and lower springs. Neither package changes the shock absorber’s internal damping.
Use the Kawasaki service procedure for the exact model year and installed shocks, together with the instructions for your All Thingz UTV kit. This is an overview, not a substitute for the complete service procedure. Professional installation is recommended.
Do not open a pressurized damper or remove its reservoir cap as part of a routine spring change. For kit-specific settings, contact All Thingz UTV. Factory preload dimensions and another brand’s spring settings are not automatically correct for this kit.
These are the existing All Thingz UTV front/rear reference figures published for this listing, retained by tire size. They are not factory specifications or a guarantee of finished height. Use them with kit-specific setup guidance; do not transfer settings from another model.
| Tire size (inches) | Front baseline (inches) | Rear baseline (inches) |
|---|---|---|
| 28 | 13.5 | 13 |
| 29 | 14.5 | 14 |
| 30 | 15 | 14.5 |
| 32 | 16 | 15.5 |
| 33 | 16.5 | 16 |
Measurement: Use level ground, consistent tire pressures and a documented load. Settle the suspension before measuring. Use the same front and rear reference points each time and confirm the kit’s measurement points with All Thingz UTV before treating these figures as adjustment targets. Tire diameter, load and modifications affect the reading. Listed tire sizes do not confirm clearance or tire fitment.
General demonstration: This video shows a Polaris Pro XP Dynamix and explains spring-installation concepts. It is not a model-specific procedure for every vehicle on this page. Use the service instructions for your exact model year, shocks and any suspension modifications.
These links help you compare spring packages or find a different vehicle configuration. They are alternative applications, not a list of required add-ons. Match the complete model, seating and shock details on the destination page.
Amazing product, bought them for my Rzr , and now a set for my KRX. Improved clearance and ride quality.
Arrived timely and packaged well. Springs were labeled correctly front and rear. Re-gained my ride height after adjustment.
We can’t say enough about our experience with ATU! When we ordered, our original tenders had allowed the machine to sag to the point of bottoming out in many places that were not an issue in the beginning. The hope with these was to gain back some height to prevent that. Wow! The tenders gave us back our ride height plus! No more bottoming out! We also cannot say enough good about the customer support at ATU concerning an issue we had. They are top notch!! If you’re considering ordering these, just do it! We put our machine against any other with higher priced springs and the only difference is we saved money to purchase other cool ATU merchandise!
Thanks for subscribing!
This email has been registered!