These are replacement hubs for our NRP Quick Shot Gated Shifters
Kit Includes:
Hub
Bushings
3 Replacement Screws
*Be Sure To Select Correct Make When Ordering*
Instructions:
Remove shifter from vehicle
Remove bushings from old shifter hub
To release red thread locking compound, carefully heat area around screws to ~350-400 degrees(F)
Carefully remove screws using a 2.5mm Hex wrench(a bit driver works best)
Once old hub is removed, reassemble with ne hub using red thread locking compound
Reinstall shifter into vehicle
These are replacement hubs for our NRP Quick Shot Gated Shifters
Kit Includes:
- Hub
- Bushings
- 3 Replacement Screws
*Be Sure To Select Correct Make When Ordering*
Instructions:
- Remove shifter from vehicle
- Remove bushings from old shifter hub
- To release red thread locking compound, carefully heat area around screws to ~350-400 degrees(F)
- Carefully remove screws using a 2.5mm Hex wrench(a bit driver works best)
- Once old hub is removed, reassemble with ne hub using red thread locking compound
- Reinstall shifter into vehicle
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.