Upgraded pin assemblies for SATV control arms

This set of four Desertcraft replacement pin assemblies fits SuperATV Atlas Pro boxed control arms that use a 7/8-inch inside-diameter uniball. The larger retaining lip supports the ball, and wrench flats give you a place to hold the pin when servicing the bolt.

Construction

Each pin is heat-treated 4140 steel and uses a Grade 9 twelve-point bolt. Four assemblies are supplied so you can replace the pins as a set.

Confirm the control arm

Check the arm series, measure the uniball inside diameter and compare your pin with the dimension drawing on Desertcraft’s pin assembly page. Vehicle model alone does not identify which aftermarket arm is installed.