Performance SXS Bushings
Refresh suspension pivots with Performance SXS Bushings A-arm and shock-bushing kits. The lineup also includes shift gates and carrier-bearing components, covering several of the smaller parts that keep a UTV project moving.
-
Vendor: PERFORMANCE SXS BUSHINGS
Polaris RZR 900 S, 1000 S and General Walker Evans Shock Bushing Kit
Refresh the shock mounting bushings on your Polaris RZR 900 S, RZR 1000 S or General equipped with Walker Evans shocks. This Performance SXS Bushings kit supplies enough bushings and pins to service both the front and rear shocks.It’s a complete front-and-rear shock bushing...- $110.00
- $110.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Polaris RZR Pro XP Heavy-Duty 7075 Aluminum Tie Rods
Upgrade the steering links on your Polaris RZR Pro XP with Performance SXS heavy-duty tie rods. The 1.250-inch-diameter rods are made from 7075 aluminum and paired with a heat-treated stainless spindle pin, heavy-duty inner ball socket and QA1 heim joint. Polaris RZR Pro XP...- $285.00
- $285.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Polaris General XP Deluxe HD Tie Rods for 64-Inch Models
These heavy-duty tie rods fit the 64-inch-wide Polaris General XP Deluxe. Performance SXS Bushings CNC-machines the 1¼-inch-diameter aluminum rods in the USA. The set includes a heat-treated stainless steel spindle pin, a heavy-duty inner ball socket and a heim joint.Check the width of your...- $274.99
- $274.99
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
2015 & Up Polaris RZR 900 S and 1000 S Heavy-Duty Tie Rods
These Performance SXS Bushings tie rods fit 2015 and newer Polaris RZR 900 S and 1000 S models. The 1¼-inch-diameter rods are CNC-machined in the USA from 7075 aluminum. The kit includes a heavy-duty inner ball socket at the rack and a QA1 heim...- $265.00
- $265.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
2016–2022 Polaris General HD Tie Rods for 60-Inch Models
These Performance SXS Bushings heavy-duty tie rods fit the 60-inch-wide 2016–2022 Polaris General. Each rod is CNC-machined in the USA from 1¼-inch-diameter 7075 aluminum. The set includes a heat-treated stainless steel spindle pin, a heavy-duty inner ball socket and a QA1 heim joint.Check your...- $265.00
- $265.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
2010–2020 Can-Am Commander 800 & 1000 Front A-Arm Bushing Kit
Rebuild the front A-arm pivots on a 2010–2020 Can-Am Commander 800 or 1000 with this Performance SXS Bushings kit. It pairs bushings CNC-machined from oil-filled UHMW bar stock with steel pivot pins.At pivots without grease fittings, grease each pin and the inside of its...- $130.00
- $130.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Performance SXS Grab Handle for 1.75-Inch Roll Cages
Add a grab point to your UTV’s 1.75-inch-diameter roll cage with this Performance SXS handle. The CNC-machined, USA-made design is easy to position and adjust. Its low-profile clamp is designed to allow a roof or windshield to mount over it.Mounting detailsPosition the handle where...- $72.75
- $72.75
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Kawasaki KRX Tie Rods
Performance SXS Bushings machines these Kawasaki KRX tie rods in the USA from 1¼-inch-diameter 7075 aluminum. The set includes a heavy-duty inner ball socket at the steering rack and a heat-treated stainless steel spindle pin at the wheel end.The manufacturer offers a lifetime warranty...- $285.00
- $285.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Kawasaki KRX Driveshaft Bearing Housing with Timken Bearing
Support your Kawasaki KRX driveshaft with this Performance SXS CNC-machined housing and sealed Timken bearing. Drain holes in the bottom of the housing allow excess water and mud to escape, addressing the contamination and shaft corrosion described by the manufacturer with the original assembly....- $155.00
- $155.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
KRX Low Profile Pull Point
The Performance SXS Bushings low-profile pull point gives the Kawasaki KRX a compact attachment point. Its CNC-machined body is anodized before the final contrast cuts are made, leaving the machined details visible against the finish.If you’re choosing a pull point for an original Kawasaki...- $75.00
- $75.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Kawasaki KRX Thick Pull Point
This Performance SXS Bushings pull point fits the Kawasaki KRX with its original Kawasaki bumper. Choose the thick profile when retaining the OEM bumper. The body is CNC-machined, anodized, then contrast-cut so the machined details stand out against the finish.Performance SXS also offers a...- $56.25
- $56.25
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Kawasaki KRX Rear Frame Plugs
Replace missing plastic plugs at the rear of your Kawasaki KRX frame with this pair from Performance SXS Bushings. Each plug mounts securely in the frame opening. One set includes two plugs.The plugs are CNC-machined and anodized before the final contrast cuts are made....- $54.95
- $54.95
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
XP1000, Turbo, Turbo S, Pro XP, 900s, General Pull Point
This Performance SXS Bushings pull point mounts low on the front of the Polaris RZR XP 1000, Turbo, Turbo S, Pro XP, 900 S and Polaris General. The low mounting position puts the attachment point at the front of the machine.The body is CNC-machined...- $55.25
$85.00- $55.25
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
KRX wheel center caps (2020 & UP)
Replace the factory plastic wheel caps on a 2020 or newer Kawasaki KRX with this set of four Performance SXS center caps. Each cap seats in the original wheel and uses a snap ring on the back to hold it in place. The caps...- $178.99
- $178.99
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Dexter Vortex axle center caps
Dexter Vortex axle center caps replace Dexter K71-G01-73, 81143 and 21-261. The pair is machined from 6061 aluminum with new O-ring seals, then black anodized and engraved. Choose a design and use a strap wrench during installation to protect the finish.- $78.00
- $78.00
- Unit price
- per
View details













