Performance SXS Bushings
Refresh suspension pivots with Performance SXS Bushings A-arm and shock-bushing kits. The lineup also includes shift gates and carrier-bearing components, covering several of the smaller parts that keep a UTV project moving.
-
Vendor: PERFORMANCE SXS BUSHINGS
Billet end caps for Bumpers / Tree kickers
Finish the open ends of a UTV bumper or tree kicker with this pair of Performance SXS billet end caps. The caps fit 1¾-inch DOM tubing with a 0.095-inch wall. Check both measurements before ordering so the caps seat correctly.Each cap is CNC-machined, black...- $59.99
- $59.99
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Sway Bar Links XP1000 / Turbo
These Performance SXS Bushings sway bar links fit all model years of the Polaris RZR XP 1000, RZR Turbo and RS1. They connect the suspension to the sway bar, which helps control body roll when one side of the suspension compresses farther than the...- $120.00
- $120.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Sway Bar Links Turbo S
These Performance SXS Bushings sway bar links fit the Polaris RZR Turbo S. The links connect the sway bar to the suspension, allowing the bar to resist body roll as the left and right wheels move through different amounts of travel.Check the model designation...- $120.00
- $120.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Kawasaki KRX Rear Hub Bushings
Service both rear hubs on a Kawasaki KRX with one Performance SXS Bushings set. It includes bushings for the driver and passenger sides and reuses the original metal end caps.Performance SXS recommends installing grease fittings in the hubs. Seat both bushings before greasing the...- $105.00
- $105.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Honda Talon Front A Arm Bushing Kit
This Performance SXS Bushings kit includes all the bushings and pivot pins for the Honda Talon’s front A-arms. It fits both factory Honda arms and SuperATV (SATV) arms. Each bushing is CNC-machined from oil-filled UHMW, with an O-ring that helps keep water and mud...- $189.00
- $189.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
RZR PRO XP Front shock bushing kit for Walker Evans Shocks
Replace the worn rubber bushings at the front shock ends of your Polaris RZR Pro XP with CNC-machined UHMW bushings from Performance SXS. One kit contains enough bushings to service both front shock ends.This kit is sized for Walker Evans front shocks. Check the...- $85.00
- $85.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
RZR Turbo S / Pro XP Outer tie rod pin
This outer tie rod pin fits the Polaris RZR Turbo S and Pro XP. Performance SXS Bushings machines it from heat-treated 17-4 stainless steel for the spindle end of the steering linkage.Compare the application and equipment on the manufacturer’s XP1000, Turbo,RZR 900 Outer tie...- $46.00
- $46.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Polaris RZR XP 1000, Turbo, 900 S and General Outer Tie Rod Pin
Replace the outer tie rod pin on the Polaris RZR XP 1000, Turbo, 900 S and General applications listed by Performance SXS Bushings. This outer spindle pin is made from heat-treated 17-4 stainless steel.Choose the correct steering pinMatch the pin to your vehicle and...- $46.00
- $46.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
5/8 LH Tie Rod Heim
This 5/8-inch left-hand-thread heim joint is a replacement tie rod end. Check the thread diameter and direction on the removed end before ordering.- $27.00
- $27.00
- Unit price
- per
View details -
Vendor: PERFORMANCE SXS BUSHINGS
Wheel Bearing Punch/Press Tool
The Performance SXS Bushings Wheel Bearing Punch/Press Tool removes and installs Polaris 44 mm wheel bearings. It contacts the outer race so installation force stays off the balls and inner race.In the shop or on the trailUse the tool in a shop press or...- $85.00
- $85.00
- Unit price
- per
View details



