Polaris RZR Pro S 2 Seater Tender Spring Kit (Fox Shocks)

Tender spring upgrade for your two-seat Polaris RZR Pro S.

Upgrade the tender springs on your two-seat Polaris RZR Pro S for Fox shocks with All Thingz UTV. This kit is intended to reduce harshness over uneven terrain while retaining the main springs and shock assemblies. Choose the Pro S kit for your installed shock brand. Turbo S and Pro XP listings are different applications.

What this kit offers

• Ride comfort: Springs intended to reduce harsh trail impacts with the correct setup for your vehicle.
• Keep your shock assemblies: This is a spring upgrade; replacement shocks are not included.
• Choose the package you need: Review the contents below before selecting a full or partial kit.

Vehicle fitment

Before ordering: Match the complete model name, seat count, and installed shocks. Double-check your selected spring color and package. Provide your model year, usual passenger/cargo load, and suspension modifications with your order.

What's included

Select an available raw or powder-coated finish. Powder coating is completed in-house at All Thingz UTV; some colors carry an additional charge.

Installation overview and setup

Follow the Polaris service procedure for your exact model year and the instructions for your installed shocks. Professional installation is recommended. The video below is a general spring-installation overview.

1. Record the starting ride height on level ground and note the vehicle's normal operating load.
2. Safely raise and support the vehicle. Unload the suspension before preload adjustments and release spring tension with suitable equipment before removing retainers.
3. Install the springs supplied in your selected package using the applicable front and rear shock procedures. Retain the main springs. Torque removed fasteners to your exact model's specifications.
4. Lower the vehicle and move it forward and backward to settle the suspension before remeasuring.
5. Follow the shock manufacturer's adjustment limits. Make small changes with the suspension unloaded, then settle and remeasure. Keep left and right settings matched on each axle.

For settings specific to your kit and vehicle configuration, contact All Thingz UTV.

All Thingz UTV ride-height baseline

The table retains the standard ATU baseline reference published with this kit. It is not a Polaris factory specification or a separately validated target for every XP S or Pro S configuration. Confirm the appropriate target for your exact setup before adjusting.

Measurement reference: Ground to the underside of the skid plate, on level ground with the suspension settled after moving forward and backward. Use consistent reference points when comparing measurements. Tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.

Spring installation video

General installation overview: This video demonstrates spring installation concepts. Hardware, procedures, and adjustments can differ by model year, shock package. Use the instructions for your exact setup.

Related spring-kit options

These are alternative applications or spring packages. Match the model, seat count, and shock package on each listing before ordering.

• RZR Pro S 2 Seater Tender Spring Kit (Walker Evans Shocks)
• RZR Pro S 4 Seater Tender Spring Kit (Walker Evans Shocks)
• RZR Pro S 4 Seater Tender Spring Kit (Fox Shocks)
• RZR Pro S 2 Seater Dual Rate Spring Kit (Universal Shock Fitment)