Polaris RZR Pro XP 2 Seater Tender Spring Kit (Walker Evans Shocks)

Tender spring comfort for your two-seat Pro XP.

The All Thingz UTV Polaris RZR Pro XP two-seat tender spring kit for Walker Evans shocks is intended to reduce harsh trail impacts while retaining your existing shock assemblies and main springs. Match the kit to your installed Walker Evans shocks and select your model year before ordering.

What this kit offers

• Trail comfort: Tender springs intended to soften harsh impacts over uneven ground.
• Keep your main springs: Replace the tender springs without purchasing complete shock assemblies.
• Choose the work you need: Full-kit, front-pair, and rear-pair options are available.

Vehicle fitment

Before ordering: Verify the installed Walker Evans shocks, choose the correct model year, and double-check your spring color. Match the Pro XP model and two-seat configuration; Pro R and Pro S are different applications.

What's included

Select an available raw or powder-coated finish. Powder coating is completed in-house at All Thingz UTV; some colors carry an additional charge.

Tender springs or a dual-rate kit?

This tender kit retains your existing main springs. For an upper-and-lower spring replacement, compare the Pro XP two-seat dual-rate kit with universal shock fitment. Review its kit options and contents before ordering.

Installation overview and setup

Use the Polaris service procedure for your exact model year and installed shock package, together with the instructions for this All Thingz UTV spring kit. Safely support the vehicle and release spring tension with appropriate equipment before removing spring retainers. Use your model's fastener torque specifications during reassembly.

Polaris's suspension diagrams identify where factory preload measurements are taken. Those shock measurements are separate from ground clearance. Factory spring preload dimensions must not be copied directly onto a different spring kit.

All Thingz UTV ride-height baseline

The following figures are All Thingz UTV setup baselines for this RZR Pro XP spring-kit application, organized by tire size. They are not Polaris factory specifications or independently verified measurements for every vehicle configuration.

Measurement reference: Ground to the underside of the skid plate, with the vehicle on level ground and the suspension settled after moving the vehicle forward and backward. Use consistent reference points when comparing measurements. These starting references do not guarantee a finished height; tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.

Polaris factory ground-clearance reference

The following figures are published for the 2024 Polaris RZR Pro XP in its factory configuration. They are factory specifications, not front/rear loaded ride-height targets for this aftermarket tender spring kit. Other model years and configurations must be checked in their own manual.

Polaris 2024 RZR Pro XP owner's manual — specifications and suspension settings

Follow the installation procedure and adjustment limits for your exact model and shock package. Contact All Thingz UTV for help with your spring-kit setup if your vehicle configuration requires additional guidance.

Spring installation video

General installation overview: Steps, hardware, and adjustments may differ by model year and shock package. Follow the service procedure for your machine and All Thingz UTV settings for this kit.

Other Pro XP tender spring kits

Choose an alternative below if your seat count or shock package differs. These are separate kits, not required add-ons.

• Pro XP two-seat tender kit for Fox shocks
• Pro XP four-seat tender kit for Walker Evans shocks