Polaris RZR XP 1000 2 Seater Tender Spring Kit (Walker Evans Shocks)(2024+)

Smoother trails. A better-supported ride.

The All Thingz UTV tender spring kit for the 2024+ Polaris RZR XP 1000 two-seater with Walker Evans shocks is designed to improve ride comfort and support your machine at its recommended ride height.

This kit replaces the tender springs on your existing shock assemblies. Choose all four tender springs, the front pair, or the rear pair to suit the work you are doing.

What this upgrade does for your ride

• Take the harshness out of uneven trails: The kit is designed to reduce harsh impacts and make rough terrain more comfortable for you and your passenger.
• Dial in your ride height: Follow the model-specific setup guidance below after installation. Accessories, added weight, and suspension setup affect the result.
• Upgrade the tender springs on your existing shocks: This is a spring kit for the listed Walker Evans application; replacement shock assemblies are not included.

Vehicle fitment

Before ordering: Confirm Walker Evans shocks are installed and double-check your selected spring color. This kit is for the redesigned 2024+ two-seat XP 1000; earlier-body XP 1000 models use a separate kit.

Provide your year, make, model, and modifications when ordering—including portals, long travel, or added weight. Looking for Fox shocks or a four-seat machine? See the alternative kits below.

What's included

Choose your finish

Select an available raw or powder-coated finish. Powder coating is completed in-house at All Thingz UTV, and some colors carry an additional charge.

Tender springs or a dual-rate spring kit?

Choose this tender spring kit when you want to replace the tender springs while retaining your existing main springs and shock assemblies.

Compare the matching dual-rate kit when you want to replace the upper and lower springs. The full 2024+ RZR XP 1000 two-seat dual-rate spring kit includes four front springs and four rear springs. That listing also offers a lowers-only option, so check your selection before ordering.

Not sure which approach suits your machine? Tell us about its current ride, shock package, accessories, and typical load through our contact page.

Installation overview and setup

Use the Polaris service procedure for your exact model year and installed shock package, together with the instructions for this All Thingz UTV spring kit. Safely support the vehicle and release spring tension with appropriate equipment before removing spring retainers. Use your model's fastener torque specifications during reassembly.

Polaris's suspension diagrams identify where factory preload measurements are taken. Those shock measurements are separate from ground clearance. Factory spring preload dimensions must not be copied directly onto a different spring kit.

All Thingz UTV ride-height baseline

The following figures are All Thingz UTV setup baselines for this RZR XP 1000 spring-kit application, organized by tire size. They are not Polaris factory specifications or independently verified measurements for every vehicle configuration.

Measurement reference: Ground to the underside of the skid plate, with the vehicle on level ground and the suspension settled after moving the vehicle forward and backward. Use consistent reference points when comparing measurements. These starting references do not guarantee a finished height; tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.

Polaris factory ground-clearance reference

The following figures are published for the 2024 Polaris RZR XP 1000 in its factory configuration. They are factory specifications, not front/rear loaded ride-height targets for this aftermarket tender spring kit. Other model years and configurations must be checked in their own manual.

Polaris 2024 RZR XP 1000 owner's manual — specifications and suspension settings

Follow the installation procedure and adjustment limits for your exact model and shock package. Contact All Thingz UTV for help with your spring-kit setup if your vehicle configuration requires additional guidance.

Spring installation video

This video demonstrates the general spring-installation process. Your model and shock package may require different steps. Follow the instructions applicable to your setup.

Watch the spring installation overview on YouTube.

Looking for a different spring kit?

Choose the kit that matches your machine and shock package. These are alternative kits, not additional parts required for this kit.

• Same model, Fox shocks: 2024+ RZR XP 1000 two-seat Fox tender spring kit.
• Four-seat model, Walker Evans shocks: 2024+ RZR XP 1000 four-seat Walker Evans tender spring kit.