Desertcraft UTV Filters
Desertcraft filtration options include washable air filters and Foam Buddy filters for UTV intake service. RZR CVT belt fans add another part of the brand's approach to dust and belt-system maintenance.
-
Vendor: DESERT CRAFT
Turbo S Blaster
The Desertcraft Turbo S Blaster is a CVT cooling fan kit for the Polaris RZR Turbo S and Turbo S 4. It directs air toward the drive belt during two conditions where Desertcraft observed heat buildup: pulling hard in low gear and holding higher...- from $230.00
- from $230.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
XP1000 / XPT Pre Filter Kit
The Desertcraft pre-filter kit places washable dry filters at the intake inlets on a Polaris RZR XP 1000 or XP Turbo (XPT). Choose CVT-only coverage to filter the clutch cooling air, or the full kit to cover the engine intake as well.Filter count by...- from $90.75
- from $90.75
- Unit price
- per
View details -
Vendor: DESERT CRAFT
XPT Blaster II - MoFLOW package
This Desertcraft package pairs a Blaster II fan kit with a MoFLOW exhaust for the Polaris RZR turbo CVT. The fan supplies cooling air to the clutch housing, and the MoFLOW gives heated air a second path out.Select the vehicle and cageChoose 2016–2018 XP...- from $363.00
- from $363.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Two color Axle wrap
Desertcraft’s two-color axle wrap shields the axle bar from flying debris. Thick-walled spiral tubing winds around the bar, with clamps at the ends to keep the wrap in place.Kit contents and selectionEach kit supplies tubing for four axles and the end clamps. Choose your...- $28.00
- $28.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
One color Axle wrap - Red
Desertcraft’s single-color axle wrap shields the axle bar from flying debris. Thick-walled spiral tubing winds around the bar, with clamps at the ends to keep the wrap in place.Kit contents and selectionEach kit supplies tubing for four axles and the end clamps. Choose the...- $25.50
- $25.50
- Unit price
- per
-
Red
-
Green
-
Grey
-
Black
View details -
Vendor: DESERT CRAFT
CVT Blaster II
The Desertcraft CVT Blaster II pushes filtered cooling air into the stock Polaris RZR XP Turbo clutch cover. Its powered blower keeps air moving across the drive belt during slow, high-load riding as well as faster runs.Included componentsThe kit includes a 160 CFM water-...- from $262.00
- from $262.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
XPT MOFLOW CVT Exhaust
The Desertcraft MoFLOW adds a second exhaust outlet to the Polaris RZR XP Turbo CVT housing. It gives hot air another route out of the clutch enclosure.Using the exhaust with a BlasterThe MoFLOW is the exhaust component. The Blaster fan supplies incoming cooling air....- $120.00
- $120.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Turbo S MOFLOW CVT Exhaust
The Desertcraft MoFLOW adds a second exhaust outlet to the Polaris RZR Turbo S CVT housing. It gives hot air another route out of the clutch enclosure.Using the exhaust with a BlasterThe MoFLOW is the exhaust component. The Blaster fan supplies incoming cooling air....- $120.00
- $120.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Prefilter wraps
These Desertcraft wraps fit over the filters on selected RZR prefilter kits and the XPT Blaster II. Desertcraft recommends them for wet riding. Match the wrap set to the filters already on your machine.Choose by kit XPT Blaster II: one small wrap. XPT or...- from $28.00
- from $28.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Suspension Seat Bracket
The Desertcraft SSBII Suspension Seat Bracket adds nearly an inch of damped travel beneath a compatible Polaris factory seat. The bracket lets the seat compress under a bump, and the included springs let you tune the response for rider weight and riding style.Check the...- from $99.00
- from $99.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Replacement Blaster /Quick Draw fans
This replacement fan services an existing Desertcraft Blaster or Quick Draw CVT cooling kit. Match the fan to the kit on the vehicle, including the model year for XP Turbo applications.Fan choices Turbo S Blaster or Pro XP Blaster: choose the fan for your...- from $45.00
- from $45.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
RZR Air Housing Straps
Desertcraft RZR Air Housing Straps secure the airbox lid along three sides. Holding the lid against the housing at several points helps it seal evenly around the filter.Choose the matching airboxSelect the version for the Polaris ACE 900, RZR 900 S/Trail/XC or RZR 1000...- $28.25
- $28.25
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Desertcraft P U R Axle mount
The Desertcraft PUR axle mount secures a spare axle assembly to round roll-bar tubing. Position the mounts on the CV splines, on the axle bar, or with one mount on each, depending on the space available.Measure the mounting tubeChoose clamps for 1½-inch, 1¾-inch or...- $75.00
- $75.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
RZR XP1000/XPT/Turbo S Air Filter
This Desertcraft dry engine air filter fits the Polaris RZR XP 1000, XP Turbo and Turbo S. It clamps to the intake in place of the stock slip-on element. Select the optional bracket if you want additional support for the filter inside the airbox.Cleaning...- from $95.00
- from $95.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
XP1000 CVT QUICK DRAW
Desertcraft’s Quick Draw routes air through the Polaris RZR XP 1000 CVT to carry heat away from the clutch and drive belt. The two versions suit different riding speeds.Choose Race or Full Force Race: ducting only, intended for sustained fast riding. Full Force: adds...- from $139.00
- from $139.00
- Unit price
- per
View details













