Desertcraft UTV Filters
Desertcraft filtration options include washable air filters and Foam Buddy filters for UTV intake service. RZR CVT belt fans add another part of the brand's approach to dust and belt-system maintenance.
-
Vendor: DESERT CRAFT
CVT Blaster II - Under Cowl
This under-cowl version of the Desertcraft CVT Blaster II mounts beneath the bed cowl on the Polaris RZR XP Turbo. A powered blower sends air into the stock clutch cover through 3-inch flexible ducting.Equipment and setupThe kit supplies a 160 CFM water- and dust-resistant...- $230.00
- $230.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Talon (In Box Pre-Filter) For Stock Air Box Lid - Foam Buddy
Desertcraft’s Foam Buddy is a washable foam pre-filter for 2019 and newer Honda Talons with the stock airbox and OEM paper filter. It fits inside the airbox lid, where incoming air passes through the foam before reaching the paper element.Using the factory intakeThe pre-filter...- $66.50
- $66.50
- Unit price
- per
View details -
Vendor: DESERT CRAFT
PRO XP CVT Secondary Adapter
The Desertcraft Pro XP CVT Secondary Adapter increases clearance around an aftermarket secondary clutch on the Polaris RZR Pro XP. Desertcraft identifies the STM secondary as one example. The adapter opens up the airflow path at the CVT cover.Match the adapter to the coverSelect...- $72.00
- $72.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
XP1000 Glove box straps
These Desertcraft straps hold the Polaris RZR XP 1000 glove-box door closed when bumps can jar it open. Release the straps to reach the contents, then secure the door again before riding.Mounting hardwareThe kit pairs flexible straps with polished mounting hardware for the glove-box...- $28.25
- $28.25
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Winch stop
Desertcraft’s dual-cast winch stop sits between the winch hook and fairlead. The firmer outer face bears against the hook, while the softer back rests against the fairlead. Desertcraft casts the two faces together to help resist splitting.Color suppliedThe stop comes in black. The red...- $21.00
- $21.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Upgraded pin assemblies for SATV control arms
This set of four Desertcraft replacement pin assemblies fits SuperATV Atlas Pro boxed control arms that use a 7/8-inch inside-diameter uniball. The larger retaining lip supports the ball, and wrench flats give you a place to hold the pin when servicing the bolt.ConstructionEach pin...- $150.00
- $150.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Turbo S / 2019 Turbo CVT Secondary Adapter
This Desertcraft secondary adapter enlarges the main CVT air inlet on a 2019 Polaris RZR Turbo or 2019 Turbo S fitted with an oversized aftermarket clutch. The extra opening addresses the airflow restriction a larger clutch can create at low rpm.What you are orderingThis...- $65.00
- $65.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Super Seal Gasket
The Desertcraft Super Seal Gasket seals the filter lip against the factory Polaris RZR XP 900 airbox. Its compliant surface takes up small gaps where the molded airbox is uneven, allowing the filter to seat without grease or extra pressure on the box.Replacing the...- $28.50
- $28.50
- Unit price
- per
View details -
Vendor: DESERT CRAFT
RZR XP900 (Upper Air Box Mount Keepers)
These Desertcraft keepers retain the upper airbox mounts on the Polaris RZR XP 900. If the upper mounts work loose during hard riding or jumping, the keepers help hold the box on its engine mounts.Where they fit in the intake systemThe keepers secure the...- $14.00
- $14.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
RZR XP900 (Box Pre-Filter) "Foam Buddy"
The Desertcraft Foam Buddy is an oilable foam pre-filter that fits inside the stock Polaris RZR XP 900 airbox lid. Air passes through the foam before reaching the main filter, so the foam can be serviced separately.Using it with your main filterWith an aftermarket...- $32.50
- $32.50
- Unit price
- per
View details -
Vendor: DESERT CRAFT
RZR 900 Air Filter 900/900S/Trail/XC/1000S/General/900ACE
This U.S.-made Desertcraft dry engine air filter replaces Polaris part 7082115. It clamps onto the intake in place of the stock slip-on element and can be cleaned and reused.Check the applicationDesertcraft lists the RZR 900, 900 S, Trail, XC, 1000 S, General 1000 and...- $95.00
- $95.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
RZR (XP900) Hood Straps
These flexible Desertcraft hood straps provide additional retention for the Polaris RZR XP 900 hood. They help hold the hood in place when the vehicle bounces over rough ground or rides on an open trailer.- $28.25
- $28.25
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Pro XP Blaster
The Desertcraft Pro XP Blaster supplies cooling air to the drive belt on the Polaris RZR Pro XP. Pulling a load in low gear and holding high speeds for extended runs can both build belt heat. Desertcraft places the fan close to the drive...- $248.00
- $248.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Kawasaki KRX Filter
The Desertcraft Kawasaki KRX Filter is a reusable engine air filter for the Kawasaki KRX and Ridge. A full ring seal at the base helps the element seat securely in the airbox, while the synthetic media can be washed between rides.Cleaning the dry filterRinse...- $95.00
- $95.00
- Unit price
- per
View details -
Vendor: DESERT CRAFT
Double Down intake package
The Desertcraft Double Down intake package adds a second inlet to the Polaris RZR XP 900 stock intake and addresses three other points in the factory airbox: the filter seal, the upper mounts and filtration ahead of the main element.What is in the package...- $266.50
- $266.50
- Unit price
- per
View details











