INSTRUCTIONS

Alaska Ship Fee

Shipping Specifically states we ship to the lower 48 However if customer is willing to pay addistional fee after shipping is quoted we will gladly ship to AK. Plesae pay fee and we will ship please allow 10 -14 days from time of shipping. 

Limit Strap Installation Instructions

Installation Steps 1. Secure the Vehicle Put the UTV in park on level ground. Use a jack to lift the front or rear of the machine (one axle at a time). Secure with jack stands and ensure wheels are off the ground. 2. Remove...

Can Am XDS Tender Install Instructions

Can Am XDS Tender Spring Installation Position machine on level flat ground. Lift machine with secure jack and remove tires. Start with either front or rear clean shock body threads with brake cleaner and soft wire brush to remove debris. ...

Gen 2 Honda Talon Heads Up Display install instructions

ATU GEN 2 Heads UP relocation kit instructions Required Tools: 5mm Allen socket 10mm socket Phillips head screwdriver Flat head screwdriver Power drill with ¼ in bit Wire stripers Lighter to heat the heat shrink but connectors utility...

Axle Magic Usage Instructions

Axle Magic Usage instructions   Lube the inner spline with penetrating oil. Securely lift the MACHINE Remove the caliper. Remove ball joint or radius rod bolts. Remove bearing carrier. If axle is broken remove broken portion of axle, or if...

RS1/Pro Xp Differential Bracket Install Instructions

Please click link https://911b18de-8291-4381-8d92-1e6a0f9097ea.filesusr.com/ugd/7c9858_f9ad8c856a12475ab0019856d2da283a.pdf https://www.ccm-na.com/      

KRX Tender Spring Installation Instructions

  Tender Spring Installation Instructions Note: Final setting is your ride height, not preload! ⚠️ Important Notes: Each machine may have different weight due to aftermarket accessories. Springs are labeled for correct placement...

Carrier Bearing Install Instructions

INSTALL OF TWO PIECE CARRIER REMOVE STOCK DRIVE SHAFT AND CARRIER NOTE - DO NOT REUSE CARRIER COVER! PRESS BEARING ONLY ON YOUR DRIVE SHAFT PLACE RED VIBRATION ISOLATION FEET UNDER CARRIER ON THE FRAME. LIGHTLY THREAD THE 2 (M10X1.5) FLAT HEAD SCREWS...

Tender and Complete spring installation instructions

  Tender and Complete Spring Installation Instructions ⚠️ IMPORTANT: Final setting is ride height — not just preload. Initial Setup & Measurements Secure the machine in Park on level ground. Measure and record: Front...