If your UTV still rides rough after new springs, start with ride height, spring setup, tire pressure and shock condition. Tell us when the roughness happens and what changed during installation. That helps narrow down what needs checking.
Check ride height and the installed setup
Use the instructions for your spring kit and vehicle. Check the specified measurement points and loading conditions, then compare your measurements with the recommended setup.
The original preload-ring position may need changing with replacement springs. On shocks with adjustable crossovers, those settings also need checking. Shock Therapy addresses both starting measurements and crossover checks in its setup guidance.
Our installation guide explains the preparation and initial setup checks. Find model-specific instructions on your ATU spring kit’s product listing.
Account for passengers and accessories
A spare tire, tools, cooler, cab and passengers all contribute to the load the suspension carries. Include those details when asking about spring selection.
Springs that are too stiff for the application can compromise comfort and traction. Eibach’s selection guidance considers vehicle load, terrain and riding style together. Read Eibach’s spring-rate guidance.
For ATU kits, our staff uses your machine and load details to assess the appropriate setup. Compare tender springs, full kits and fitment.
Include tires and shock condition
Check tire pressure against the guidance for your vehicle and tire setup. Mention any wheel or tire changes made alongside the springs. Shock Therapy identifies tires, pressure and wheel offset as factors when investigating persistent roughness. Read Shock Therapy’s guidance.
Also report leaking shocks, visible damage or a change in handling. Your suspension technician can assess whether the shocks need service or tuning.
Describe what you feel
When contacting us, include whether the problem happens over small bumps, during deeper compression or as a wheel drops over an obstacle.
For a clunk as a tire leaves the ground, see our guide to top-out noise and limit straps.
Send your model year, full model, installed shocks, spring kit, usual load and ride-height measurements. Clear photos of the front and rear spring assemblies also help. Contact All Thingz UTV.
