Skip to content
TRY OUR AI-DRIVEN SEARCH BAR!
Cart
0 items

Why Does My UTV Clunk When a Tire Leaves the Ground?

by Dustin Robbins 30 Oct 2026
Off-road tire beside the title Why Does My UTV Clunk? When a Tire Leaves the Ground, on a white background with a cyan divider.

A clunk as a tire lifts off the ground can be the shock reaching the end of its extension travel, often called top-out. Correctly fitted limit straps can help control that last part of suspension extension. But a noise alone does not establish the cause, and straps are not a repair for worn or damaged parts.

Start by checking your suspension setup and identifying when the sound occurs. A clunk as a wheel drops away from the vehicle is a different complaint from a bang when the suspension compresses into a bump.

What is shock top-out?

A shock extends as the wheel moves downward relative to the chassis. Top-out is the end of that extension travel. When the suspension reaches that point forcefully, you may hear or feel a clunk.

Shock Therapy describes this extension clunk in its manufacturer explanation of UTV limit straps. It also notes that heavier wheels and tires can increase the load involved. That makes recent tire, wheel, or suspension changes useful information when diagnosing the noise.

Why ATU recommends starting at factory ride height

After installing an ATU spring kit, we recommend resetting ride height to the factory recommendation for your specific model. If you need additional clearance, ATU’s recommendation allows up to ½ inch above that setting. This is our setup recommendation, not a universal specification issued by every vehicle manufacturer.

Suspension settings affect handling. For example, Polaris’s Pro R and Pro R 4 suspension guidance distinguishes settings by vehicle and shock type, sets maximum allowable preload, and explains that adjustments can change handling. Those Pro R settings should not be copied onto another model.

Ride height and spring preload are not the same measurement. With replacement springs, use the kit’s setup instructions to reach the intended ride height rather than assuming the original preload-ring position still applies. Find installation instructions on the spring kit product listing for your specific model.

For preparation and general setup, see our spring installation guide. If you are choosing a kit, start with our tender spring and full spring kit comparison.

What to check before buying a fix

  • When does it happen? Note whether the noise occurs as a wheel lifts, on landing, while turning, or during ordinary bumps.
  • What changed? Record recent spring, shock, tire, wheel, or suspension work.
  • Is the setup correct? Check ride height using the instructions for your model and spring kit.
  • Does anything need repair? Have a new or persistent clunk inspected, especially if you notice looseness, leaking shocks, visible damage, or a change in handling.

You do not need to reproduce a hard impact to describe the problem. Give your technician the conditions under which you already noticed it.

How limit straps can help

Limit straps control how far the suspension extends. With the correct mounting, length, and adjustment, they can cushion the end of extension and reduce a confirmed top-out clunk. Fitment must match the vehicle and its suspension setup.

They are not a cure for every noise, and eliminating a clunk does not by itself confirm that the rest of the suspension is sound. In its off-road shock owner’s manual, FOX explains that its shocks are intended to damp compression and rebound rather than withstand severe top-out or bottom-out forces, and calls for appropriate travel stops in severe applications. Follow the guidance applicable to your particular shocks.

When rebound adjustment or revalving makes sense

A suspension technician can assess whether rebound tuning is appropriate for your spring and shock combination. Available external adjustments depend on the shock; not every adjustment knob controls rebound.

Internal revalving is more involved. FOX’s manual describes shim stacks that regulate oil flow through the piston and affect damping. Choosing a change requires the correct shock information and an assessment of the setup. Adding a heavier shim is not a universal instruction for stopping a clunk.

Get help with your setup

Contact All Thingz UTV with your year, model, seat count, shock brand, installed spring kit, and any wheel or tire changes. Tell us when the noise occurs so we can help you identify the right next step.

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
Back In Stock Notification

Choose options

this is just a warning
Login
Shopping cart
0 items